90° countersunk head

• Underhead milling pockets for optimal countersinking
• Easy to move and gentle on material
• Also ideal for fittings

Washer head

• Eliminates the need to use a separate washer —reduced

• Highlights of the product

  The Rapid® Hardwood is the first screw ETA-approved for all hard woods without pre-drilling, both for screwing in side and end timber (90° bis 0°) and for screw fittings in the narrow edge of laminated veneer beech lumber.
  
  The unique RAPID® Hardwood makes full loads possible regardless of whether the timber was pre-drilled. However, if you pre-drill with ø max. 6.5 mm screws, the RAPID® Hardwood’s screw-in torque will be reduced by 2/3 and the screw distances will be much smaller.
• One step operation saves time
• ETA approval
• Low impact on materials
• Higher core diameter - so that the tensile strength for 8 mm is comparable with conventional 10 mm wood screw
• assembly times
• Higher pull-through values

Straight friction part

• The new, patented friction part greatly reduces screw-in resistance
• Less effort required to screw in
• Faster screwing processes
• Improved battery life for screwdriver

Single thread

• Minimised blast effect
• High pull-out values even in coniferous timber
• Values 3-4x higher than coniferous timber

Patented compressor tip

• Screw drills better
• Reduced blast effect
• No pre-drilling in hard woods and LVL-beech